🛒 Must-Have Item:
Throttle Cable – 015833
- Top 1 outer length: 460mm
- Bottom 1 outer length: 640mm
- Bottom 2 outer length: 340mm
- Outer top 1 fitting: 90′ bend, 6mm push in, special locking plate
- Outer bottom 1 fitting: 45′ bend, 6mm adjuster (0.75mm pitch)
- Outer bottom 2 fitting: standard ferrule
- Top 1 inner overhang: 62mm
- Bottom 1 inner overhang: 81mm
- Bottom 2 inner overhang: 92mm
- Additional outer info: top adjuster
- Inner top 1 nipple: 5mm x 6mm barrel
- Inner bottom 1 nipple: standard carb
- Inner bottom 2 nipple: standard carb
🔍 Highlight
⚡ Updated
Some bikes have one single pull throttle cable while others have two which are:
- Throttle Cable A or 1 = (Pull)
- Throttle Cable B or 2 = (Push)
These two cables each have a different use. The pull cable pulls the throttle open, hence the name. The push cable however, doesn’t actually push anything, it acts as a safeguard pulling the throttle closed if the spring fails. They are both used in tension, one pulls the throttle open, the other pulls them shut when you roll the throttle forward.
Thousands of customers love this product. New and improved – now better than ever. Trusted by 50,000+ happy customers.
