💡 Pro Tip:
Throttle Cable – 015822
- Top 1 outer length: 820mm
- Bottom 1 outer length: 825mm
- Bottom 2 outer length: 665mm
- Outer top 1 fitting: 6mm adjuster
- Outer bottom 1 fitting: standard ferrule
- Outer bottom 2 fitting: standard ferrule
- Top 1 inner overhang: 89mm
- Bottom 1 inner overhang: 87mm
- Bottom 2 inner overhang: 84mm
- Inner top 1 nipple: 6mm x 6mm barrel
- Inner bottom 1 nipple: standard carb
- Inner bottom 2 nipple: standard carb
✨ Note
Some bikes have one single pull throttle cable while others have two which are:
- Throttle Cable A or 1 = (Pull)
- Throttle Cable B or 2 = (Push)
These two cables each have a different use. The pull cable pulls the throttle open, hence the name. The push cable however, doesn’t actually push anything, it acts as a safeguard pulling the throttle closed if the spring fails. They are both used in tension, one pulls the throttle open, the other pulls them shut when you roll the throttle forward.
Trusted by 50,000+ happy customers.
✨ Note
