Throttle Cable – 015782
- Top 1 outer length: 1015mm
- Outer top 1 fitting: 8mm adjuster
- Outer bottom 1 fitting: 6mm adjuster (0.75mm pitch)
- Top 1 inner overhang: 125mm
- Additional outer info: corrugated plastic protector on bottom half outer
- Inner top 1 nipple: 6mm x 6mm barrel
- Inner bottom 1 nipple: standard carb
🎉 Hot deal
Some bikes have one single pull throttle cable while others have two which are:
- Throttle Cable A or 1 = (Pull)
- Throttle Cable B or 2 = (Push)
✨ Note
These two cables each have a different use. They are both used in tension, one pulls the throttle open, the other pulls them shut when you roll the throttle forward.
The pull cable pulls the throttle open, hence the name. The push cable however, doesn’t actually push anything, it acts as a safeguard pulling the throttle closed if the spring fails. Limited stock available – don’t miss out!
🖱️ Frequently clicked
