📦 Don’t miss this:
Throttle Cable – 015755
- Top 1 outer length: 965mm
- Outer top 1 fitting: 90′ bend, 7mm outer diameter
- Outer bottom 1 fitting: 6mm adjuster (0.75mm pitch)
- Top 1 inner overhang: 88mm
- Additional outer info: middle adjuster
- Additional fittings Info: bend is loose
- Inner top 1 nipple: 6mm x 6mm barrel
- Inner bottom 1 nipple: standard carb
📈 Growing demand
⚡ Updated
Some bikes have one single pull throttle cable while others have two which are:
✅ Verified
- Throttle Cable A or 1 = (Pull)
- Throttle Cable B or 2 = (Push)
These two cables each have a different use. The pull cable pulls the throttle open, hence the name. The push cable however, doesn’t actually push anything, it acts as a safeguard pulling the throttle closed if the spring fails. They are both used in tension, one pulls the throttle open, the other pulls them shut when you roll the throttle forward.
Order now before it’s gone!
