🎯 Trending Product: They are both used in tension, one pulls the throttle open, the other pulls them shut when you roll the throttle forward.
The push cable however, doesn’t actually push anything, it acts as a safeguard pulling the throttle closed if the spring fails.
Throttle Cable – 015747
- Top 1 outer length: 525mm
- Bottom 1 outer length: 965mm
- Outer top 1 fitting: 90′ bend, 9mm push in, special locking plate
- Outer bottom 1 fitting: 6mm screw over
- Top 1 inner overhang: 38mm
- Bottom 1 inner overhang: 85mm
- Additional outer info: has connector box, top adjuster, top outer is grey
- Additional fittings Info: bend is loose
- Inner top 1 nipple: 6mm x 6mm barrel
- Inner bottom 1 nipple: standard carb
📈 Growing demand
Some bikes have one single pull throttle cable while others have two which are:
- Throttle Cable A or 1 = (Pull)
- Throttle Cable B or 2 = (Push)
These two cables each have a different use. The pull cable pulls the throttle open, hence the name.
