✨ Editor’s Choice:
Throttle Cable – 015744
- Top 1 outer length: 680mm
- Outer top 1 fitting: 90′ bend, 9mm push in, 14mm outer diameter stop plate
- Outer bottom 1 fitting: standard ferrule
- Top 1 inner overhang: 76mm
- Additional outer info: top adjuster
- Additional fittings Info: bend is loose
- Inner top 1 nipple: 6mm x 7mm barrel
- Inner bottom 1 nipple: standard carb
💡 Tip
🔥 Trending now
Some bikes have one single pull throttle cable while others have two which are:
- Throttle Cable A or 1 = (Pull)
- Throttle Cable B or 2 = (Push)
These two cables each have a different use. The pull cable pulls the throttle open, hence the name. The push cable however, doesn’t actually push anything, it acts as a safeguard pulling the throttle closed if the spring fails. They are both used in tension, one pulls the throttle open, the other pulls them shut when you roll the throttle forward.
