Throttle Cable – 015680

Throttle Cable – 015680

• Top 1 outer length: 705mm

🎉 Hot deal

• Top 2 outer length: 700mm
• Outer top 1 fitting: 90′ bend, with separator points
• Outer top 2 fitting: 90′ bend, with separator points
• Outer bottom 1 fitting: 45′ bend, 6mm push in
• Outer bottom 2 fitting: 45′ bend, 6mm push in
• Top 1 inner overhang: 109mm

🧠 Expert insight

• Top 2 inner overhang: 111mm
• Additional outer info: bottom 1 adjuster, cable 2 middle adjuster, cable 2 separator clip at bottom

🎯 Popular

• Inner top 1 nipple: 5mm x 6mm barrel
• Inner top 2 nipple: 5mm x 6mm barrel
• Inner bottom 1 nipple: 5mm x 7mm barrel
💡 Tip
• Inner bottom 2 nipple: 5mm x 7mm barrel

Some bikes have one single pull throttle cable while others have two which are:

1. Throttle Cable A or 1 = (Pull)
2. Throttle Cable B or 2 = (Push)

These two cables each have a different use. The pull cable pulls the throttle open, hence the name. The push cable however, doesn’t actually push anything, it acts as a safeguard pulling the throttle closed if the spring fails. They are both used in tension, one pulls the throttle open, the other pulls them shut when you roll the throttle forward.

Engineered with precision and attention to detail.