📦 Don’t miss this:
Throttle Cable – 015664
- Top 1 outer length: 800mm
- Bottom 1 outer length: 495mm
- Bottom 2 outer length: 455mm
- Outer top 1 fitting: 90′ bend, 9mm push in, push over locking plate
- Outer bottom 1 fitting: 6mm adjuster
- Outer bottom 2 fitting: 7mm-4mm tapered ferrule
- Top 1 inner overhang: 76mm
- Bottom 1 inner overhang: 73mm
- Bottom 2 inner overhang: 93mm
- Additional outer info: middle adjuster
- Additional fittings Info: bottom 1 adjuster and top bend are loose
- Inner top 1 nipple: 6mm x 4mm barrel
- Inner bottom 1 nipple: standard carb
- Inner bottom 2 nipple: standard carb
🧩 Related info
📈 Growing demand
📣 Limited offer
Some bikes have one single pull throttle cable while others have two which are:
- Throttle Cable A or 1 = (Pull)
- Throttle Cable B or 2 = (Push)
These two cables each have a different use. The pull cable pulls the throttle open, hence the name. The push cable however, doesn’t actually push anything, it acts as a safeguard pulling the throttle closed if the spring fails. They are both used in tension, one pulls the throttle open, the other pulls them shut when you roll the throttle forward.
