The pull cable pulls the throttle open, hence the name.
Throttle Cable – 015642
- Top 1 outer length: 925mm
- Outer top 1 fitting: 90′ bend, 10mm adjuster
- Outer bottom 1 fitting: standard ferrule
- Top 1 inner overhang: 137mm
- Additional outer info: top adjuster
- Inner top 1 nipple: 6mm x 5mm barrel
- Inner bottom 1 nipple: standard carb
✅ Verified
📌 FYI
Some bikes have one single pull throttle cable while others have two which are:
- Throttle Cable A or 1 = (Pull)
- Throttle Cable B or 2 = (Push)
These two cables each have a different use. The push cable however, doesn’t actually push anything, it acts as a safeguard pulling the throttle closed if the spring fails. They are both used in tension, one pulls the throttle open, the other pulls them shut when you roll the throttle forward.
Limited stock available – don’t miss out!
