✨ Editor’s Choice: The pull cable pulls the throttle open, hence the name.
Throttle Cable – 015609
- Top 1 outer length: 695mm
- Bottom 1 outer length: 385mm
- Bottom 2 outer length: 285mm
- Outer top 1 fitting: 10mm adjuster
- Outer bottom 1 fitting: 6mm adjuster
- Outer bottom 2 fitting: standard ferrule
- Top 1 inner overhang: 62mm
- Bottom 1 inner overhang: 55mm
- Bottom 2 inner overhang: 59mm
- Additional fittings Info: top adjuster is loose
- Inner top 1 nipple: 6mm x 6mm barrel
- Inner bottom 1 nipple: 6mm x 6mm barrel
- Inner bottom 2 nipple: standard carb
✨ Note
Some bikes have one single pull throttle cable while others have two which are:
- Throttle Cable A or 1 = (Pull)
- Throttle Cable B or 2 = (Push)
These two cables each have a different use. The push cable however, doesn’t actually push anything, it acts as a safeguard pulling the throttle closed if the spring fails. They are both used in tension, one pulls the throttle open, the other pulls them shut when you roll the throttle forward.
Tested for quality and durability. Backed by positive reviews and high ratings. A purchase you won’t regret.
📈 Growing demand
